meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

com:basic_knx_eib [2023/10/12 20:39] – created - external edit 127.0.0.1com:basic_knx_eib [2024/11/15 20:18] (current) vamsan
Line 1: Line 1:
-====== KNX / EIB ======+====== lamaPLC Communication: KNX / EIB ======
 {{ :com:knx_eib_logo.jpg?150|KNX / EIB}} {{ :com:knx_eib_logo.jpg?150|KNX / EIB}}
  
Line 73: Line 73:
 {{ :com:knx_4.png |Collision avoidance in KNX TP}} {{ :com:knx_4.png |Collision avoidance in KNX TP}}
  
-This procedure is very similar to the [[com:can|CAN-bus]] arbitration procedure.+This procedure is very similar to the [[com:basic_can|CAN-bus]] arbitration procedure.
  
 Each transmitting device listens in to every bit of data transfer along the bus. If two devices are sending a telegram at the same time, then inevitably (and no later than at the moment of transmission of the sender address in the address field), one sender will transmit a 0 while the other wants to transmit a 1. Each transmitting device listens in to every bit of data transfer along the bus. If two devices are sending a telegram at the same time, then inevitably (and no later than at the moment of transmission of the sender address in the address field), one sender will transmit a 0 while the other wants to transmit a 1.
Line 112: Line 112:
   * "KNX BASICS" White paper pdf file   * "KNX BASICS" White paper pdf file
  
 +===== KNX topics on lamaPLC =====
 +{{topic>knx}}
 +
 +\\
 +\\
 +\\
 +{{tag>communication bus KNX KNX_TP KNX_PL KNX_RF KNX_IP EIB EHS BatiBUS ethernet ETS}}
 +\\
 +This page has been accessed for: Today: {{counter|today}}, Until now: {{counter|total}}