LamaPLC: XTM35SC Energy meter with Modbus communication

Other unit names:

• VE EMDIN02

The XTM35SC is an inexpensive current meter that can be purchased (e.g. on Amazon). It measures consumption, voltage and current on one phase. It does not require an external measuring ring. Suitable for home automation and smaller equipment. Of course, it is not MID compliant. The measurement results can also be queried remotely via Modbus RTU communication.

Description:

• 35 mm standard rail mounting according to the DIN EN50022 standard.
• Bipolar width (module 17.5mm), conforms to the DIN43880 standard
• Standard configuration 5 + 1 digit display (9999999.1kWh) LCD. Function can be selected (display voltage current, power, frequency, power factor).
• Setup measurement single-phase two-wire active energy consumption. It's nothing to do with the direction of load current flow. Compliance with GB / T17245.321-2008 standard.

Specification:

• Power supply: 230V, 1 phase
• Current: 5 (80) A
• Accuracy class: 1.0
• Frequency: 50/60Hz
• Display mode: LCD 5+1 digits = 99999.9 kWh
• Power Consumption: ⇐0.4W (8VA)
• Temperature range: -20 to 65 °C
• LED: 1 flashing / pulsing
• Pulse output: 1000 imp/kWh
• Voltage: 12 to 27V
• Current: 27mA
• Pulse value: 90 ms
• Model: XTM35SC
• Accuracy: Class 1
• Voltage: 220V
• Current: 5（30A 15/15（60A Optional (optional)
• Insulation performance: AC voltage 4kv for 1 minute, 1.2/50us waveform pulse voltage 6kv
• Size: 80 x 65 x 35mm / 3.15 x 2.56 x 1.38inch

RS485 communication interface, MODBUS RTU protocol:

• Baudrate: 9600 Baud
• Parity: Even
• Databits: 8
• Stopbits: 1

The registers are read-only.

The registers are read / write.

This page has been accessed for: Today: 4, Until now: 4