====== lamaPLC: Code! ======

==== MicroPython example codes for the RP2040_ETH_Module ====
|<100% 30% 70%>|
|[[:code:rp2040_eth_modul_modbus_tcp_example_1|Modbus TCP example]]|The RP2040 module has Ethernet integrated, which can be accessed via UART1. This code creates Modbus Holding registers on the module with contents from 1 to 10.|
|[[:code:rp2040_eth_modul_modbus_tcp_sniffer_1|Modbus TCP sniffer]]|The program receives and analyses incoming TCP Modbus telegrams, but does not respond.|
|[[:code:rp2040_eth_modul_i2c_scanner|I2C scanner]]|The program scans the addresses of devices connected via I²C.|
|[[:code:rp2040_eth_modul_mlx90614_1|MLX90614 simple]]|Read [[:sensor:mlx90614|MLX90614 (GY-906) infrared non-contact Thermometer]] to serial.|
|[[:code:rp2040_eth_modul_bme680|Read BME 680/688 sensor data]]|Reads data from the [[sensor:bmp_bme|BME680 sensor]]|
|[[:code:rp2040_eth_modul_bme680_modbus|Read BME 680/688 sensor data and store in Modbus input registers]]|Reads data from the [[sensor:bmp_bme|BME680 sensor]] and displays it in the Modbus input registers.|


==== C example codes for the Arduino Module (Arduino IDE) ====
|<100% 30% 70%>|
|[[:code:arduino_modul_bme680|Read BME680 Sensor]]|Read [[sensor:bmp_bme|BME680]] Temperature/Humidity/Barometric Pressure/Gas (VOC) Module|

This page has been accessed for: Today: {{counter|today}}, Until now: {{counter|total}}